Search Page
Save citations to file
Email citations
Send citations to clipboard
Add to Collections
Add to My Bibliography
Create a file for external citation management software
Your saved search
Your RSS Feed
Filters
Results by year
Table representation of search results timeline featuring number of search results per year.
Year | Number of Results |
---|---|
2002 | 1 |
2004 | 1 |
2009 | 1 |
2012 | 1 |
2024 | 0 |
Search Results
4 results
Results by year
Filters applied: . Clear all
Page 1
Vertebroplasty: reusable flange converter with hub lock for injection of polymethylmethacrylate with screw-plunger syringe.
Radiology. 2002 Mar;222(3):851-5. doi: 10.1148/radiol.2223001722.
Radiology. 2002.
PMID: 11867812
During percutaneous vertebroplasty, a screw-plunger syringe provides a powerful controlled injection, but coupling of the screw plunger with interchangeable disposable standard syringe barrels results in syringe flange bending failure during the middle of the inject …
During percutaneous vertebroplasty, a screw-plunger syringe provides a powerful controlled injection, but coupling of the screw pl …
Hypothermic manipulation of bone cement can extend the handling time during vertebroplasty.
Lai PL, Tai CL, Chu IM, Fu TS, Chen LH, Chen WJ.
Lai PL, et al.
BMC Musculoskelet Disord. 2012 Oct 16;13:198. doi: 10.1186/1471-2474-13-198.
BMC Musculoskelet Disord. 2012.
PMID: 23072273
Free PMC article.
By twisting the compressor, the piston transmits its axial load to the plunger, which then pumps the bone cement out. The experiments were categorized based on the different types of hypothermic manipulation that were used. ...
By twisting the compressor, the piston transmits its axial load to the plunger, which then pumps the bone cement out. The experiments …
Item in Clipboard
The effect of pulsed jet lavage in vertebroplasty on injection forces of PMMA bone cement: an animal study.
Boger A, Benneker LM, Krebs J, Boner V, Heini PF, Gisep A.
Boger A, et al.
Eur Spine J. 2009 Dec;18(12):1957-62. doi: 10.1007/s00586-009-1079-5. Epub 2009 Jul 1.
Eur Spine J. 2009.
PMID: 19568774
Free PMC article.
Injection forces were measured with instrumentation for 1 cc syringes, additionally acquiring plunger displacement. Averaged injection forces measured, ranged from 12 to 130 N and from 28 to 140 N for the lavage group and the control group, respectively. ...
Injection forces were measured with instrumentation for 1 cc syringes, additionally acquiring plunger displacement. Averaged injectio …
Item in Clipboard
Innovative gas injection technique for closed-hollow obturator.
Iramaneerat W, Seki F, Watanabe A, Mukohyama H, Iwasaki Y, Akiyoshi K, Taniguchi H.
Iramaneerat W, et al.
Int J Prosthodont. 2004 May-Jun;17(3):345-9.
Int J Prosthodont. 2004.
PMID: 15237884
Three experimental groups were designated: in the control group (C), resin was packed into the mold without argon gas injection; in the gas injection group (GI), after resin packing, gas was injected into the resin bulb in the mold; and in the plunger/gas injection group ( …
Three experimental groups were designated: in the control group (C), resin was packed into the mold without argon gas injection; in the gas …
Item in Clipboard
Cite
Cite